Skip to content
Locate Flock

Find Flock and other license plate cameras in Oregon

358 of 541 mapped cameras are recorded as made by Flock Safety, 131 as other makers and 52 with no maker recorded. Of the mapped cameras in Oregon, 79% stand inside an incorporated city, town or village; the others are in unincorporated communities or outside any place. From one mapped camera in Oregon to the nearest other, the median gap is 450 feet. For every 10,000 residents there are 1.3 mapped cameras, on the 2020 Census count of 4,237,256 residents. Mapped cameras turn up in 65 places across Oregon, and 11 of those places have the 10 mapped cameras at which this site measures a place.

Data as of , updated weekly. The figures for Oregon last changed on .

Where in Oregon the cameras are mapped

1 to 9 cameras10 to 49 cameras50 to 199 cameras
In one square
  • 1 to 9 cameras
  • 10 to 49 cameras
  • 50 to 199 cameras

Each square is a quarter of a degree on a side, 17 miles from top to bottom, and is shaded by the number of mapped cameras inside it. A square is drawn for Oregon when the nearest place with a mapped camera is in Oregon, so the squares along the state line are approximate, and one that straddles the line counts the cameras on both sides.

© OpenStreetMap contributors

Places in Oregon with a page

So far, 2 places in Oregon have their own page. The list runs from the shortest typical distance to the longest: the distance from a typical point inside the place to the nearest mapped camera. The share is the part of the area inside the place’s boundary that lies within half a mile of one.

Places in Oregon with a page, by typical distance to the nearest mapped camera
PlaceTypical distanceArea within half a mileMapped cameras
Medford0.5 miles46%45
Portland0.9 miles22%71

Measured places without a page

At least 10 cameras are mapped in each of the 9 places below, enough for them to be measured the same way, but none has a page of its own. Pages are added in stages, starting where a mapped camera is typically closest. When a place gets a page of its own is set out with the list of states.

Each line gives the typical distance to the nearest mapped camera, the share of the area inside the boundary that lies within half a mile of one, and the mapped cameras inside it. The order is the same: shortest typical distance first.

  • Sutherlintypically 0.4 miles · 68% of its area within half a mile · 31 camerasMap of Sutherlin
  • North Bendtypically 0.4 miles · 69% of its area within half a mile · 10 camerasMap of North Bend
  • Roseburgtypically 0.5 miles · 45% of its area within half a mile · 16 camerasMap of Roseburg
  • Umatillatypically 0.5 miles · 45% of its area within half a mile · 10 camerasMap of Umatilla
  • Hillsborotypically 0.8 miles · 25% of its area within half a mile · 29 camerasMap of Hillsboro
  • Salemtypically 0.8 miles · 31% of its area within half a mile · 44 camerasMap of Salem
  • Pendletontypically 0.8 miles · 31% of its area within half a mile · 18 camerasMap of Pendleton
  • Beavertontypically 1.1 miles · 19% of its area within half a mile · 16 camerasMap of Beaverton
  • Eugenetypically 1.3 miles · 17% of its area within half a mile · 20 camerasMap of Eugene

Smaller places with mapped cameras

Places in Oregon with fewer than 10 mapped cameras are not measured, because a few pins say little about a whole place. These are the largest of them.

Another 24 places in Oregon have a mapped camera and are not listed here.

How these figures are worked out

Every camera here is a pin a volunteer added to OpenStreetMap, so each count is a floor. A place is its U.S. Census Bureau boundary, and a camera belongs to it when its pin falls inside. For each measured place, a grid of sample points is laid inside the boundary, and the typical distance is the median straight-line distance from those points to the nearest mapped camera of any make.