Skip to content
Locate Flock

Find license plate cameras in North Dakota

123 of 451 mapped cameras are recorded as made by Flock Safety, 319 as other makers and 9 with no maker recorded. Of the mapped cameras in North Dakota, 92% stand inside an incorporated city, town or village; the others are in unincorporated communities or outside any place. From one mapped camera in North Dakota to the nearest other, the median gap is 50 feet. For every 10,000 residents there are 5.8 mapped cameras, on the 2020 Census count of 779,094 residents. Mapped cameras turn up in 12 places across North Dakota, and 5 of those places have the 10 mapped cameras at which this site measures a place.

Data as of , updated weekly. The figures for North Dakota last changed on .

Where in North Dakota the cameras are mapped

1 to 9 cameras10 to 49 cameras50 to 199 cameras
In one square
  • 1 to 9 cameras
  • 10 to 49 cameras
  • 50 to 199 cameras

Each square is a quarter of a degree on a side, 17 miles from top to bottom, and is shaded by the number of mapped cameras inside it. A square is drawn for North Dakota when the nearest place with a mapped camera is in North Dakota, so the squares along the state line are approximate, and one that straddles the line counts the cameras on both sides.

© OpenStreetMap contributors

Places in North Dakota with a page

So far, 3 places in North Dakota have their own page. The list runs from the shortest typical distance to the longest: the distance from a typical point inside the place to the nearest mapped camera. The share is the part of the area inside the place’s boundary that lies within half a mile of one.

Places in North Dakota with a page, by typical distance to the nearest mapped camera
PlaceTypical distanceArea within half a mileMapped cameras
West Fargo0.4 miles70%55
Dickinson0.5 miles52%138
Bismarck0.7 miles37%141

Measured places without a page

At least 10 cameras are mapped in each of the 2 places below, enough for them to be measured the same way, but none has a page of its own. Pages are added in stages, starting where a mapped camera is typically closest. When a place gets a page of its own is set out with the list of states.

Each line gives the typical distance to the nearest mapped camera, the share of the area inside the boundary that lies within half a mile of one, and the mapped cameras inside it. The order is the same: shortest typical distance first.

  • Fargotypically 0.7 miles · 35% of its area within half a mile · 52 camerasMap of Fargo
  • Grand Forkstypically 1.7 miles · 9% of its area within half a mile · 12 camerasMap of Grand Forks

Smaller places with mapped cameras

Places in North Dakota with fewer than 10 mapped cameras are not measured, because a few pins say little about a whole place. These are the largest of them.

How these figures are worked out

Every camera here is a pin a volunteer added to OpenStreetMap, so each count is a floor. A place is its U.S. Census Bureau boundary, and a camera belongs to it when its pin falls inside. For each measured place, a grid of sample points is laid inside the boundary, and the typical distance is the median straight-line distance from those points to the nearest mapped camera of any make.