Skip to content
Locate Flock

Find Flock and other license plate cameras in Massachusetts

986 of 1,205 mapped cameras are recorded as made by Flock Safety, 82 as other makers and 137 with no maker recorded. Of the mapped cameras in Massachusetts, 58% stand inside an incorporated city, town or village; the others are in unincorporated communities or outside any place. From one mapped camera in Massachusetts to the nearest other, the median gap is 0.2 miles. For every 10,000 residents there are 1.7 mapped cameras, on the 2020 Census count of 7,029,917 residents. Mapped cameras turn up in 102 places across Massachusetts, and 30 of those places have the 10 mapped cameras at which this site measures a place.

Data as of , updated weekly. The figures for Massachusetts last changed on .

Where in Massachusetts the cameras are mapped

1 to 9 cameras10 to 49 cameras50 to 199 cameras200 to 999 cameras
In one square
  • 1 to 9 cameras
  • 10 to 49 cameras
  • 50 to 199 cameras
  • 200 to 999 cameras

Each square is a quarter of a degree on a side, 17 miles from top to bottom, and is shaded by the number of mapped cameras inside it. A square is drawn for Massachusetts when the nearest place with a mapped camera is in Massachusetts, so the squares along the state line are approximate, and one that straddles the line counts the cameras on both sides.

© OpenStreetMap contributors

Places in Massachusetts with a page

So far, 3 places in Massachusetts have their own page. The list runs from the shortest typical distance to the longest: the distance from a typical point inside the place to the nearest mapped camera. The share is the part of the area inside the place’s boundary that lies within half a mile of one.

Places in Massachusetts with a page, by typical distance to the nearest mapped camera
PlaceTypical distanceArea within half a mileMapped cameras
Lowell0.3 miles77%42
Quincy0.4 miles64%56
Springfield0.6 miles41%53

Measured places without a page

At least 10 cameras are mapped in each of the 27 places below, enough for them to be measured the same way, but none has a page of its own. Pages are added in stages, starting where a mapped camera is typically closest. When a place gets a page of its own is set out with the list of states.

Each line gives the typical distance to the nearest mapped camera, the share of the area inside the boundary that lies within half a mile of one, and the mapped cameras inside it. The order is the same: shortest typical distance first.

  • Chelseatypically 0.2 miles · 92% of its area within half a mile · 14 camerasMap of Chelsea
  • Reveretypically 0.3 miles · 88% of its area within half a mile · 16 camerasMap of Revere
  • Maldentypically 0.3 miles · 84% of its area within half a mile · 10 camerasMap of Malden
  • Lawrencetypically 0.3 miles · 76% of its area within half a mile · 21 camerasMap of Lawrence
  • Lynntypically 0.4 miles · 70% of its area within half a mile · 23 camerasMap of Lynn
  • Norwoodtypically 0.4 miles · 59% of its area within half a mile · 16 camerasMap of Norwood
  • Saugustypically 0.4 miles · 60% of its area within half a mile · 17 camerasMap of Saugus
  • Weymouth Towntypically 0.4 miles · 58% of its area within half a mile · 33 camerasMap of Weymouth Town
  • Methuentypically 0.5 miles · 53% of its area within half a mile · 43 camerasMap of Methuen
  • Milfordtypically 0.5 miles · 51% of its area within half a mile · 14 camerasMap of Milford
  • Braintree Towntypically 0.5 miles · 46% of its area within half a mile · 24 camerasMap of Braintree Town
  • Miltontypically 0.5 miles · 43% of its area within half a mile · 12 camerasMap of Milton
  • Woburntypically 0.6 miles · 42% of its area within half a mile · 14 camerasMap of Woburn
  • Randolph Towntypically 0.6 miles · 36% of its area within half a mile · 10 camerasMap of Randolph Town
  • Somervilletypically 0.7 miles · 33% of its area within half a mile · 13 camerasMap of Somerville
  • Chicopeetypically 0.7 miles · 31% of its area within half a mile · 23 camerasMap of Chicopee
  • Bostontypically 0.7 miles · 32% of its area within half a mile · 45 camerasMap of Boston
  • North Attleborough Towntypically 0.8 miles · 24% of its area within half a mile · 10 camerasMap of North Attleborough Town
  • Medfordtypically 0.8 miles · 25% of its area within half a mile · 14 camerasMap of Medford
  • Haverhilltypically 0.9 miles · 26% of its area within half a mile · 20 camerasMap of Haverhill
  • Worcestertypically 0.9 miles · 25% of its area within half a mile · 23 camerasMap of Worcester
  • Bridgewater Towntypically 1.1 miles · 17% of its area within half a mile · 11 camerasMap of Bridgewater Town
  • Brocktontypically 1.1 miles · 14% of its area within half a mile · 10 camerasMap of Brockton
  • Tauntontypically 1.3 miles · 16% of its area within half a mile · 18 camerasMap of Taunton
  • Holyoketypically 1.3 miles · 15% of its area within half a mile · 12 camerasMap of Holyoke
  • Westfieldtypically 1.3 miles · 14% of its area within half a mile · 12 camerasMap of Westfield
  • Fall Rivertypically 1.6 miles · 21% of its area within half a mile · 27 camerasMap of Fall River

Smaller places with mapped cameras

Places in Massachusetts with fewer than 10 mapped cameras are not measured, because a few pins say little about a whole place. These are the largest of them.

Another 42 places in Massachusetts have a mapped camera and are not listed here.

Who is recorded as running them

In Massachusetts, 662 of 1,205 mapped cameras carry an operator tag, which is 55% of the cameras here.

  • Public agency566 cameras
  • Private91 cameras
  • Camera company0 cameras
  • Other5 cameras
  • Not recorded543 cameras

The kinds are read from the operator names mappers typed. A name is counted as private only when it plainly belongs to a business, an association or another private owner; a name the rules cannot place is counted as other; and where no operator is recorded the camera is not assumed to be anybody’s. The method page sets out how a name is sorted into a kind.

How these figures are worked out

Every camera here is a pin a volunteer added to OpenStreetMap, so each count is a floor. A place is its U.S. Census Bureau boundary, and a camera belongs to it when its pin falls inside. For each measured place, a grid of sample points is laid inside the boundary, and the typical distance is the median straight-line distance from those points to the nearest mapped camera of any make.